Accelerated Carbonation Chamber

Accelerated Carbonation Chamber
Accelerated Carbonation Chamber
Price And Quantity
  • 1
  • Piece/Pieces
  • 700000 INR
  • 650000.00 - 850000.00 INR
    Product Specifications
    • Steel
    • Yes
    • Yes
    • PLC Control
    • 230 Volts, Volt (v)
    • 600 x 600 x 600 (L x W x H) Millimeter (mm)
    • 1 Year
    Product Description


    Carbonation Chamber for Accelerated Carbonation test of Concrete

    Salient Features

    • Double wall construction
    • Interior fabricated from high grade stainless steel(S.S.304).
    • Exterior body made of Mild steel material - which is duly powder coated in attractive shades
    • Double walled metal door with sponge - type silicon gasket for air-tight sealing
    • Electrical wiring as per CE Compliance
    • Chamber illumination is accomplished by Fluorescent light with door switch.
    • Cord wire duly tested and inspected with stress factor as per CE standard
    • Electric Motor located at the back side of  unit, protected with safety cover to avoid accident
    • Standard motor of reputed Make
    • User friendly and tactfully designed chamber door and locking mechanism
    • Aesthetic outer appearance and high quality
    • Long lasting SS tubular heaters used as heating element.The stainless steel fins provided to ensure better heat transfer.
    • Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condenser.


    70mm polyurethane insulation (PUF)/ fiberboard to ensure better insulation and less leakage of temperature or RH from inner body to the surroundings

    Air Circulation

    Temperature is maintained by a quiet running blower circulation air throughout the chamber. Forced air circulated vertically down and re circulated throughout  the chamber for uniform temperature and humidity.


    Humidity created by steam injection method. The boiler tank is fitted in the back side of the chamber for better servicing,Electromagnetic switch for controlling the wet heater from burning off if water level is not adequate. Float valve provided to control water level in the boiler tank

    Heating & Cooling System

    • Long lasting SS tubular heaters used as heating element.The stainless steel fins provided to ensure better heat transfer.
    • Hermetically sealed compressor CFC free compressor (134-AGas) coupled with evaporation coil and condenser

    Trays for samples

    • Removable S.S. trays
    • Manufactured from strong S.S. Rods to with- stand heavy load of test specimens
    • Such trays also facilitates better air circulation
    • The distance between trays will be 15-20 centimeters
    • Control
    • Microprocessor based Digital Auto-Tune PID temperature and direct RH digital controller. Humidity directly measured in % RH by electronic sensor.

    Safety Features

    • High temperature safety cut off
    • Low water level boiler cut off
    • Electrical overload cut off
    • Time delay for compressor switch ON
    • Electrical circuit breaker


    Supplied complete with Instruction manual and test reports


    Unconditional warranty against faulty workmanship for 1 year at site from the date of installation of the equipment.

    Pre installation mandatory requirement : (Guarantee void in case of non compliance)

    • Distilled water OR DM water continuous supply with tap for boiler input of 3/8" BSP at 3 feet height.
    • Room temperature around machine  Should be preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However surrounding temperature should not exceed 30°C .
    • Stabilized Input Voltage of 230 Volt, 50 Hz,  20 Amps, AC Supply. Use of Servo Controlled Stabilizer is recommended.
    • Water drain line with 3/8" nozzle to be provided at floor level.
    • Recommended to install the chamber 2 ft. away from the back wall and 1 ft. from all sides
    • UPS for control system up to 1 KVA

    Supplied complete with following Accessories

    (1) Mould 100mm X 100mm X 200mm for making prism (5 Nos)

    (2) Attachment for Splitting

    • 100 mm cube
    • 150 mm cube
    • 100mm X 100mm X 200 mm prism

    Trade Information
    • Ahmedabad
    • Telegraphic Transfer (T/T), Letter of Credit (L/C), Cheque, Cash in Advance (CID), Cash Advance (CA), Cash Against Delivery (CAD)
    • 150 Per Year
    • 4 Week
    • Contact us for information regarding our sample policy
    • Wooden packing with strong base
    • Africa, Middle East, South America, Australia, Asia
    • All India
    • ISO 9001 : 2015
    Contact Us

    A-1301, BVR Ek, Opp. Hotel Inder Residency, Near Gujarat College, Ellisbridge, Ahmedabad, Gujarat, 380006, India
    Phone :91-79-66211234